Archive

A FEW WORDS ABOUT LUBRICANTS We all know that a drop of oil or a little dab of grease can make wonders when things jam, run booly or squeak. Suddenly things run smoothly again and the noise stops. If we have chosen the correct lubricant and continue to supply it in a suitable way and […]

Though simple in design, single-point spring-powered lubricators are very effective at delivering an “on-demand” amount of grease to a connected bearing. By using different springs, users are able to estimate the time it will take to run the unit to empty. The on-demand technology makes it impossible to predict the exact date, but the clear […]

The air oil lubrication system feeds oil directly into the mixer block. Once in the mixer block, metered oil and compressed air are mixed and distributed to several oil-air lines. Inside the oil-air lines, under the influence of the compressed air, a continuous oil film is gradually formed from the impulse-fed oil. This film moves […]

The oil mist cooling/lubrication system is an advanced cooling and lubrication system consisting of lubricator, nozzle, controller and lubrication accessories. Lubrication oil is delivered by periodically operating the pneumatic spray lubricator (i.e. FF). This joins with compressed air at the nozzle for spray cooling and lubrication of kinetic pairs. The system can also use positive […]

Dual line lubrication systems have two independent main feed lines connected to and controlled by a reversing valve. These two main lines alternately supply lubricant to distributors during a lubrication cycle. Dual line distributors provide a fixed amount of lubricant to the lube points. The system consists of a lubricator, a filter, a reversing valve, […]

Progressive lubrication systems consist of a lubricator, progressive distributors, pipeline accessories and controllers. Features include: accurate metering of volume depending on piston diameter and stroke, easy installation, adjustment and maintenance. The PRG system is widely used in mining, steel mills, metallurgy, vehicles, harbors, construction machinery and other industries. The lubricant used is from NLGI-000 toNLGI-2, […]

Positive displacement injector lubrication systems (PDI) are divided into two types: oil positive displacement injector lubrication systems and grease positive displacement injector lubrication systems. Advantages -Easy to add or reduce lube points – Precise delivery -Easily monitored system pressure Oil Positive Displacement Injector Lubrication System These systems are precise in lubrication delivery. Because some models […]

Single line resistance lubrication systems (SLR) are available in two styles: an oil single line resistance lubrication system and a grease single line resistance lubrication system. Advantages: Compact structure and small footprint – Delivery to each lubricating point – Easy to add or subtract lube points – Special seal structures protect against contamination Oil SLR […]

What Is Lubrication? During lubrication, lubricant enters into the surfaces of moving friction points and forms an oil film. In centralized lubrication systems, lubricators provide a fixed amount of lubricant to distributors which measure and feed it to lubrication points. Centralized lubrication systems reduce friction and abrasion, cool, prevent corrosion, decrease vibration, and forms a […]